How to widen tractor wheels

A 185/70R15 tire has an overall diameter (wheel + tire) of 15 + (2 x 5.3) = 25.6 inches. If you want to install 17 – inch wheels, you will have to use a tire with a smaller height in order to maintain an overall (wheel + tire) diameter close to 25.6 inches. So the tire you want for your new 17 – inch wheels is a 205/50R17.

Acquire 3/32" / 12 or 13 gauge / .093" thickness x 33-3/8" length of flat sheet metal, one for each wheel. For 23-10.50×12 tires, the wheels will need to be widened to 11" (measured inside rim to rim). And for 26-12.00×12 tires, the wheels will need to be widened to 13" (measured inside rim to rim).

Readers ask: How To Widen Garden Tractor Wheels?

Official Site: https://www.tractorfriends.org/answers-on-questions/readers-ask-how-to-widen-garden-tractor-wheels.html

Stay within the manufacturer recommended size increase (1-2″) so if you have 16 ″ rims, don’t go bigger than 18 ″. Make sure there’s enough clearance in the wheel arches to turn full lock (both ways) and go over bumps. If you go wider and they are protruding out the side of the arches, they are probably too big.

Ditto, used rims can be had for $75-100. You can pay more if you don’t want to look around a little. The easiest way to widen rims is to buy another pair and cut those in half and cut …

People Also Ask how to widen tractor wheels

What is the diameter of a garden tractor wheel?

Most rear garden tractor wheels have a 5-hole bolt pattern and a circle diameter of 4-1/2". This is the same bolt pattern used on most early domestic (American made) Ford (car wheels), domestic (American made) Chrysler, Dodge, Plymouth (cars and light trucks) and most 5-hole utility trailer wheels.

How do I mount the wheels on my Tractor?

Align the wheel/center in a large metal lathe or on the tractor axle so they won’t wobble when mounted on the tractor. IMPORTANT: If you don’t feel comfortable using a metal lathe, please consult a professional and experienced machinist with a lathe.

Why are the rear wheels on a tractor so narrow?

This will allow for a narrow wheel base width on the rear because it’s hard to guide a tractor with one’s body weight when the rear wheels set out a lot. The reason for this is if a tractor starts heading toward the boundary line, one would need to shift their body weight or lean less with [rear] tires that set inward or closer together.

How do you determine the bolt pattern of a tractor wheel?

To determine the bolt pattern of a wheel (or mounting flange), measure from the outer edge of one bolt hole to the center of another that’s farthest away. Most rear garden tractor wheels have a 5-hole bolt pattern and a circle diameter of 4-1/2".

People Also Searches how to widen tractor wheels

DIY Adjusting Rear Wheel Spacing On A Tractor Video Answer

Leave a Comment