How to set up a slasher on a tractor

https://hayesproducts.com.au/product-category/tractor-slashersFeaturing adjustable skids, multiple cutting heights, stone guards, Slip clutch, sturdy 5mm dec…

Line up the lower linkage arms with the linkage pins of the slasher, slide the linkage arms onto the pins and secure with lynch pins. Attach the top link to the slashed. Raise the slasher from the ground and adjust stabilizer bars or chains if required. CAUTION:

Aussie slasher setup refining – Yesterday’s Tractors

Official Site: https://www.yesterdaystractors.com/cgi-bin/viewit.cgi?bd=ferg&th=126325

I set the slasher skids about 25 mm of the ground with chains and raised the skid plates so the blade is closer to the ground, and tried it with out the pto shaft, it worked better with the slasher floating but looks like the blade will now contact the ground sometimes, in those dips, ill keep playing, Might make up a temp jocky wheel to see …

Raise the slasher on the tractor hydraulics until the front blade is at the required cutting height. Adjust the tractor top link until the body or skids are parallel to the ground. With height control wheel on the ground, fit pins to nearest hole in downward position. Set Hydraulic stop, raise slasher , and remove and refit

People Also Ask how to set up a slasher on a tractor

How do you adjust the slasher on a John Deere tractor?

Adjust the tractor top link until the body or skids are parallel to the ground. With height control wheel on the ground, fit pins to nearest hole in downward position. Set Hydraulic stop, raise slasher , and remove and refit height control pins in next hole down.

How do you attach a slasher to a chain?

Line up the lower linkage arms with the linkage pins of the slasher, slide the linkage arms onto the pins and secure with lynch pins. Attach the top link to the slashed. Raise the slasher from the ground and adjust stabilizer bars or chains if required.

When should the PTO be disengaged when transporting the slasher?

Disengage the PTO when transporting the slasher, or when not in use. Take care when leaving the tractor. Ensure the slasher is in the lowered position, the PTO is disengaged, the tractors parking brake is on, the tractors engine is off and the key removed.

People Also Searches how to set up a slasher on a tractor

Attach grass slasher implement to tractor 3 point linkage Video Answer

Leave a Comment