How does draft control work on a tractor

How does draft control work? Draft control is the automatic adjustment of the three-point hitch when using tillage equipment such as a moldboard plow, ripper or cultivator. This can either be done by sensing the amount of forward pressure on the three-point top link, called top link sensing, or by sensing the rearward pull on the lower links called lower link sensing.

How to Set the Draft Control on a Tractor. Step 1. Locate the draft control lever inside the cab of the tractor. Reference the operator’s manual if necessary; the draft control lever is in a …

How does tractor draft control work? – findanyanswer.com

Official Site: https://findanyanswer.com/how-does-tractor-draft-control-work

Without it, when the mulboards hit a hard patch of ground the tractor will spins its wheels, and in some cases, break the plow. Draft control senses the extra strain on the hitch and allows the plow to raise just enough to get through the …

I remember when I was a kid, probably 11-12 years old when I asked dad, "What is the lever on the tractor that says ‘draft control‘ for?" My father was a ve…

People Also Ask how does draft control work on a tractor

How to set the draft control on a tractor?

You begin by moving the draft lever to the maximum draft setting (either its highest or lowest position depending on the tractor) which cancels all draft sensing. You can then lower the depth control lever to set the optimal depth of the plow. After setting the depth you can begin moving the draft lever back toward the center of its range.

How does tractor draft control work?

How does tractor draft control work? Without it, when the mulboards hit a hard patch of ground the tractor will spins its wheels, and in some cases, break the plow. Draft control senses the extra strain on the hitch and allows the plow to raise just enough to get through the hard spot, immediately returning to the desired depth.

How to use draft control?

Step 1 Locate the draft control lever inside the cab of the tractor. Reference the operator’s manual if necessary; the draft control lever is in a different location on every model. For example, in a Ford 8870 it is a round knob with the numbers 1 through 5 next to the hydraulic control levers. Step 2 Set the draft control in a middle position.

What is 3 point hitch draft control?

Draft control is the automatic adjustment of the three-point hitch when using tillage equipment such as a moldboard plow, ripper or cultivator. This can either be done by sensing the amount of forward pressure on the three-point top link, called top link sensing, or by sensing the rearward pull on the lower links called lower link sensing.

People Also Searches how does draft control work on a tractor

john deere draft control setting
mahindra draft control
john deere draft control
tractor draft control explained
ford tractor draft control
massey ferguson draft control setting
draft control on ford 3000
3 point hitch draft control

What is Draft Control? Video Answer

Leave a Comment